Fabric Spreader
Fully-automatic fabric spreading on rails — servo tension and edge alignment for high-volume cutting lines.
- Working widths
- 1.6 – 3.1 m
- 5 spread widths across SPX5 + SPX6
- Max drive speed
- 98 m/min
- SPX6 X6-160 flagship
- Tension modes
- 220 / 160 mm
- Single-tension or dual-tension roll
- Tension control
- Servo loop
- Closed-loop + optical edge alignment
2 system lines in one platform.
Fully-automatic fabric spreading on rails — servo tension and edge alignment for high-volume cutting lines.
Servo-driven tension control
Servo tension system keeps fabric flat across the spread with independent tension setting per roll, so the multi-ply cutter receives a square, even lay-up at line speed.
98 m/min drive speed
Continuous lay-up at up to 98 m/min keeps the multi-ply cutter fed; supports both 220 mm single-tension and 160 mm dual-tension roll modes.
Five working widths
1.6 / 1.9 / 2.1 / 2.6 / 3.1 m spreads — pair directly with favorable's FE / FS / FC multi-ply cutting beds across the same width range.
Pick the spreader for the job.
Workflows our customers actually run, and the system we recommend for each. Tap the system name to view its full spec table.
Mid-volume cut floor, standard roll widths (1.6 – 2.1 m)
High-volume or wide-format cut floor (2.6 – 3.1 m)
Continuous lay-up feeding a multi-ply cutter at line speed
| Workflow | Recommended system | Why |
|---|---|---|
| Mid-volume cut floor, standard roll widths (1.6 – 2.1 m) | SPX5 | SPX5 covers 1.6 / 1.9 / 2.1 m with closed-loop servo tension + optical edge alignment |
| High-volume or wide-format cut floor (2.6 – 3.1 m) | SPX6 | SPX6 up to 98 m/min and 3.1 m working width for large multi-ply lines |
| Continuous lay-up feeding a multi-ply cutter at line speed | SPX6 | 98 m/min drive speed keeps FE / FS / FC cutting beds fed without manual pausing |
Where Spreader runs in production.
The industries where this equipment runs in production. Click through to see workflow context and equipment recommendations for each vertical.
Ready to spec a spreader cutting line?
Send us material, daily volume and throughput target. A favorable engineer returns a spreader configuration and a price within 24 hours — typically same business day.