Gen II Super-High-Speed Inkjet Plotter
3,000 m+ continuous accurate feed with optional bulk-ink supply — ink cost drops 90% versus consumer cartridges, overnight production runs uninterrupted.
- Print head
- HP 600 DPI
- Continuous feed
- 3,000 m+
- Ink cost saved
- 90%
- Scan speed
- Up to 240 m²/h
with CISS
Gen II LH series is the production workhorse — 3,000 m+ continuous accurate feed, optional bulk-ink supply saves 90% of ink cost. HP thermal-inkjet 600 DPI heads, automatic paper take-up or take-up-free printing. American single-piece full-metal high-rigidity wear-resistant chassis.
- Pattern paper
- Plotting paper
- Sample / pattern rooms
- Fabric design studios
- Batch-production floors
High-accurate production frame, lightning engine
Upgradeable CISS — 90% cost saving
An optional continuous-ink supply system cuts ink cost by 90%; HP thermal 600 DPI nozzles need no special maintenance.
High-speed servo control
Closed-loop positioning across the whole procedure keeps lines accurate at full speed.
Independent output manager
A standalone manager handles background printing and queues files automatically.
Auto paper-area detection
The plotter detects the available plotting area on the paper automatically.
Ink & paper alarms
Ink-consumption prompts and a no-paper alarm keep long runs supervised.
Abnormal-stop memory
On an exceptional stop the machine records its position automatically, so plotting resumes where it left off.
Networked auto-printing
Network printing runs unattended with real-time monitoring of every operating status.
Where Gen II LH runs
Industries that pair with this system in production. Tap a card to see the full workflow and the favorable line-up that backs it.
Built for the cutting room
- Print head
- HP thermal-inkjet · 600 DPI · maintenance-free
- Print resolution
- 300 – 600 DPI (Save-ink draft mode optional)
- Line quality
- Precise, smooth and seamless — no gap between contiguous sections
- Continuous feed
- 3,000 m+ accurate feed (invisible encoder)
- Bulk-ink option
- Continuous-ink supply saves 90% on ink cost
- Paper handling
- Auto take-up or take-up-free printing
- Paper installation
- Front or back paper-supply (optional)
- Software compatibility
- HPGL (special formats back-orderable)
- Intelligent carriage
- Auto origin memory · servo control · ink- and paper-level monitoring
- Chassis
- American single-piece full-metal high-rigidity wear-resistant
- Paper requirement
- Ordinary paper
- Power supply
- 90 / 264 V · 47 / 66 Hz
- Interface
- USB · digital touchpad keypad
Model variants in one platform.
Each variant shares the platform vacuum, chassis and control system listed above — selection is by the per-model specs below.
| Spec | LH200-2 | LH220-2 | LH240-2 | LH240-4 |
|---|---|---|---|---|
| Head configuration | 2 heads (upgradable to 3 or 4) | 2 heads (upgradable to 3 or 4) | 2 heads (upgradable to 3 or 4) | 4 heads (upgradable to 4) |
| Max paper width | 1,730 mm | 1,980 mm | 2,350 mm | 2,350 mm |
| Max plot width | 1,650 mm | 1,850 mm | 2,050 mm | 1,850 mm |
| Scan speed (135 Sqm/Hr mode) | 135 m²/h | 135 m²/h | 135 m²/h | — |
| Scan speed (240 Sqm/Hr mode) | — | — | — | 240 m²/h |
More in Plotter
F1 Inkjet
F1 NP series is the high-speed garment inkjet plotter.
Gen III EPSON
Gen III EPSON line uses EPSON continuous-supply print heads with full closed-loop servo positioning.
Gen III HP45
Gen III HP45 platform shares the Gen III architecture with HP 45A print heads.
LH-C Combo
LH-C Lightning Engine combo plots a marker and contour-cuts it on the same gantry — print and cut in one pass at 1,200 mm/s vector speed.
Ready for a quote on the Gen II LH?
Send us material, daily volume and throughput target for your Gen II LH configuration. A favorable engineer returns a price within 24 hours — typically same business day.