Plotter
Industrial CAD plotting, plot-and-cut combo and PVC template milling — from inkjet output to finished templates.
- Print widths
- 1.85 – 2.4 m
- Single, dual or quad head configs
- Print heads
- HP 600 DPI
- + EPSON high-speed option
- Continuous feed
- 3,000 m+
- Gen II LH with invisible encoder
- Workflows
- 5 lines
- Print · plot+cut · template milling
7 system lines in one platform.
Industrial CAD plotting, plot-and-cut combo and PVC template milling — from inkjet output to finished templates.
HP thermal + EPSON head options
Choose head technology per workflow — HP 600 DPI thermal-inkjet on F1 / Gen II / Gen III HP45, or EPSON continuous-supply on Gen III EPSON. Both run on high-speed servo with full closed-loop positioning.
Bulk-ink saves 90%
The Gen II LH series with bulk-ink supply runs 3,000 m+ continuous output between paper changes; ink cost drops by an order of magnitude versus consumer cartridges.
Print + cut + mill in one pass
LH-C combo prints and contour-cuts on the same gantry; DH/FH milling plotters plot, cut and mill rigid PVC templates in one pass — no transfer between machines.
Pick the system that fits your floor.
F1 Inkjet
F1 NP series is the high-speed garment inkjet plotter.
Gen II LH
Gen II LH series is the production workhorse — 3,000 m+ continuous accurate feed, optional bulk-ink supply saves 90% of ink cost.
Gen III EPSON
Gen III EPSON line uses EPSON continuous-supply print heads with full closed-loop servo positioning.
Gen III HP45
Gen III HP45 platform shares the Gen III architecture with HP 45A print heads.
LH-C Combo
LH-C Lightning Engine combo plots a marker and contour-cuts it on the same gantry — print and cut in one pass at 1,200 mm/s vector speed.
DH / FH Template
DH / FH template milling plotters drill, punch, cut, plot and mill PVC garment templates in one pass.
AH Flatbed
AH flatbed pattern cutting machines inkjet-plot and knife-cut on a single flatbed in one pass, driven by Favorable's Vertical Acceleration Engine and a patented sub-cavity negative-pressure matrix platform.
Pick the plotter for the job.
Workflows our customers actually run, and the system we recommend for each. Tap the system name to view its full spec table.
Daily garment marker output
Overnight long-format output (3,000 m+)
Print + contour cut in one pass
Flatbed plot + knife-cut (pattern room)
PVC garment template milling
Multi-machine pattern audit
High-speed marker (sample room)
| Workflow | Recommended system | Why |
|---|---|---|
| Daily garment marker output | Gen III HP45 | Production-grade HP 45A, dual / quad head |
| Overnight long-format output (3,000 m+) | Gen II LH | Gen II LH with bulk-ink option, −90% ink cost |
| Print + contour cut in one pass | LH-C Combo | LH-C combo plotter-cutter |
| Flatbed plot + knife-cut (pattern room) | AH Flatbed | AH negative-pressure matrix bed — 1,500 mm/s plot & cut |
| PVC garment template milling | DH / FH Template | DH / FH — plot, cut and mill in one pass |
| Multi-machine pattern audit | Gen III EPSON | EPSON heads, independent output controller |
| High-speed marker (sample room) | F1 Inkjet | F1 NP series, 600 m+ continuous accurate feed |
Where Plotter runs in production.
The industries where this equipment runs in production. Click through to see workflow context and equipment recommendations for each vertical.
Ready to spec a plotter cutting line?
Send us material, daily volume and throughput target. A favorable engineer returns a plotter configuration and a price within 24 hours — typically same business day.