Multi-Ply Cutter
Multi-ply automated cutting for apparel mass production, automotive interior, upholstered furniture and technical textiles.
- Cut height
- 50 – 90 mm
- Compressed multi-ply, FE / FS / FC
- Max cut speed
- 80 m/min
- FE / FS flagships on 90 mm ply
- Series
- FE / FS / FC
- FE/FC · FS/FC · FS900/FC800X
- Total power
- 26 – 30 kW
- FE/FC 26–28 kW · FS / FS900 28–30 kW
3 system lines in one platform.
Multi-ply automated cutting for apparel mass production, automotive interior, upholstered furniture and technical textiles.
Magnetic-levitation vacuum option
FE series ships with a 9 kW magnetic-levitation vacuum pump that drives ~60% stronger fabric hold-down with ~30% less pump energy than conventional turbine pumps.
Edge-walk-cut + common-line AI
FS series adds whole-domain software control — the gantry cuts pieces continuously as fabric advances and auto-merges adjacent paths into a single shared cut line. No re-positioning between blocks.
Dynamic blade compensation
Blade trajectory is monitored in real time and auto-compensated for wear so every cut piece stays dimensionally consistent across a long shift.
Pick the system that fits your floor.
FE / FC Series
FE / FC is positioned for textile-apparel, automotive interior, intimate-wear and denim multi-ply cutting.
FS / FC Series
FS / FC is positioned for automotive and industrial-material multi-ply cutting.
FS900 / FC800X
FS900 / FC800X covers home-textile, aerospace and luggage / leather goods cutting.
Pick the multi-ply for the job.
Workflows our customers actually run, and the system we recommend for each. Tap the system name to view its full spec table.
Garment, intimate-wear & denim multi-ply
Automotive interior & industrial-material lines
Home-textile, aerospace composite & luggage
| Workflow | Recommended system | Why |
|---|---|---|
| Garment, intimate-wear & denim multi-ply | FE / FC Series | Magnetic-levitation vacuum hold-down, 80 m/min on 90 mm ply |
| Automotive interior & industrial-material lines | FS / FC Series | Edge-walk-cut + common-line cutting AI, higher hold-down |
| Home-textile, aerospace composite & luggage | FS900 / FC800X | FS-tier hardware; FC800X cuts thick technical layups at 50 m/min |
Where Multi-Ply runs in production.
The industries where this equipment runs in production. Click through to see workflow context and equipment recommendations for each vertical.
Ready to spec a multi-ply cutting line?
Send us material, daily volume and throughput target. A favorable engineer returns a multi-ply configuration and a price within 24 hours — typically same business day.