Single-Ply Cutter
Silent, precise single-ply CNC flatbed cutters — for sample rooms, leather goods, footwear, signage and small-batch customisation.
- Working widths
- 1.2 – 2.5 m
- Standard LHC + super-long custom
- Knife speed
- 1,500 mm/s
- Vertical-engine head, full speed from rest
- AI scan
- 3 – 5 s
- Per layout, on-bed capture
- Vacuum bed
- 8 zones
- Honeycomb aluminium + 4 mm felt belt
12 system lines in one platform.
Silent, precise single-ply CNC flatbed cutters — for sample rooms, leather goods, footwear, signage and small-batch customisation.
Vertical-engine knife head
Vertical-engine head starts at full speed from rest — no acceleration ramp delay on short cuts, sample pieces or pattern-room jobs.
8-zone honeycomb vacuum bed
Honeycomb aluminium platform with 4 mm imported felt belt and 8 independent vacuum zones — strong hold for irregular hides and small pieces, flat platform that resists deformation.
On-bed vision capture (optional)
Optional vision-recognition module captures the on-bed material layout before each cut so nesting follows the actual fabric edge, not just the marker. Available across the LHC, silent and super-long lines.
Pick the system that fits your floor.
LHC Series
LHC standard series is the workhorse single-ply CNC flatbed cutter.
Super-Long Cutter
LHC15016 is the super-long custom cutter — base cutting range 1,600 × 1,500 mm with build-to-order widths above 1,000 mm, lengths above 1,600 mm and heights above 20 mm.
Silent Sample Cutter
LHC1512 / LHC1516 is the silent precision pattern cutter — built for pattern rooms that need sample cuts without ambient noise.
Fixed-Table 1625
The 1625 fixed-table cutter is favorable's 1,600 × 2,500 mm single-ply base — a fixed vacuum-adsorption bed driven by an imported servo rack-and-pinion system at up to 1,800 mm/s, 60 mm cut thickness and ±0.
Auto-Feed 1625
The 1625 auto-feed cutter adds a powered conveyor to the 1,600 × 2,500 mm platform, feeding material continuously through the cutting zone for uninterrupted production.
Extended 1625
The 1625 extended-bed cutter lengthens the auto-feed conveyor to a 4,400 mm footprint for oversized panels and long technical-fabric runs.
Multi-Ply 1625
The 1625 multi-layer line extends the platform into a small-multi-layer spread-and-cut workflow, with separate loading, spreading, cutting and receiving zones and an air-floating, non-powered secondary laminating tabletop.
Vision 1625
The 1625 large-vision cutter adds an overhead large-vision camera system to the 1,600 × 2,500 mm platform, locating printed marks and contours for accurate cut-to-print registration.
Fiberglass Cutter
favorable fiberglass cutting machine is the 1625 platform developed for the glass-fibre industry — a precise, smokeless solution for aerospace composites and wind-power fiberglass.
Carbon-Fibre Cutter
favorable carbon-fibre fixed-table cutter applies the 1625 platform to carbon-fibre composite processing.
Footwear 1608
favorable's single-head footwear & luggage cutter runs a 1,600 × 800 mm vacuum bed at up to 1,800 mm/s with ±0.
Footwear 1616
favorable's dual-head footwear & luggage cutter runs a 1,600 × 1,600 mm vacuum bed at up to 1,800 mm/s with ±0.
Pick the single-ply for the job.
Workflows our customers actually run, and the system we recommend for each. Tap the system name to view its full spec table.
Standard single-ply production (1.6 – 2.5 m)
Super-long format (build-to-order, > 1.6 m length)
Silent pattern / sample room cutting
Fixed-table precision cutting, no conveyor needed
Continuous roll cutting without manual repositioning
Oversized panels and long technical-fabric runs
Small-batch multi-layer spread and cut on one machine
Cut-to-print registration on patterned or pre-printed material
Fiberglass and aerospace composite precision cutting
Carbon-fibre sheet cutting without dust or charred edges
Shoe uppers, linings and bag panels — single-head production
Higher-throughput footwear and bag cutting — dual head
| Workflow | Recommended system | Why |
|---|---|---|
| Standard single-ply production (1.6 – 2.5 m) | LHC Series | Workhorse flatbed at 1,500 mm/s knife speed |
| Super-long format (build-to-order, > 1.6 m length) | Super-Long Cutter | Servo dual-drive multi-gantry on linear rails |
| Silent pattern / sample room cutting | Silent Sample Cutter | Patented quiet structure, servo 1,200 mm/s |
| Fixed-table precision cutting, no conveyor needed | Fixed-Table 1625 | 1,600 × 2,500 mm vacuum bed, 1,800 mm/s, ±0.1 mm |
| Continuous roll cutting without manual repositioning | Auto-Feed 1625 | Conveyor feed runs long rolls unattended at 1,800 mm/s |
| Oversized panels and long technical-fabric runs | Extended 1625 | 4,400 mm conveyor bed for material that exceeds the standard 1625 length |
| Small-batch multi-layer spread and cut on one machine | Multi-Ply 1625 | Air-floating table with spreading, cutting and receiving zones in one footprint |
| Cut-to-print registration on patterned or pre-printed material | Vision 1625 | Overhead large-vision camera registers cut path to print edge before each cut |
| Fiberglass and aerospace composite precision cutting | Fiberglass Cutter | ±0.1 mm servo, smokeless blade, AI nesting lifts material yield 15%+ |
| Carbon-fibre sheet cutting without dust or charred edges | Carbon-Fibre Cutter | Physical blade — no laser burn, no dust, ±0.1 mm on carbon sheet |
| Shoe uppers, linings and bag panels — single-head production | Footwear 1608 | 1,600 × 800 mm bed sized for the footwear and bag trade, 1,800 mm/s |
| Higher-throughput footwear and bag cutting — dual head | Footwear 1616 | Dual independent heads on 1,600 × 1,600 mm bed for two-line output |
Where Single-Ply runs in production.
The industries where this equipment runs in production. Click through to see workflow context and equipment recommendations for each vertical.
Ready to spec a single-ply cutting line?
Send us material, daily volume and throughput target. A favorable engineer returns a single-ply configuration and a price within 24 hours — typically same business day.